- cross-posted to:
- world@quokk.au
- cross-posted to:
- world@quokk.au
The products covered by the obligation to repair currently include:
- washing machines and washer-dryers
- dishwashers
- refrigerators
- electronic displays
- welding equipment
- servers and data storage products
- mobile phones, cordless phones and tablets
- tumble dryers
- e-bikes and e-scooters batteries (from 18 February 2027)
- local space heaters
You must log in or # to comment.
But not games…
Unfortunately there are some exemptions. Flexible / folding displays are not covered. Fitness trackers and watches are not covered.
There is also a battery regulation coming in next year to require phone batteries to be replaceable with no tools but that has loop holes too - long life batteries aren’t covered, IP67 rated phones aren’t covered. So you can bet your boots those two reasons will be what makers use to bullshit their way out of it.
Having those rules is much better than not having them. Also, IP rating is not enough, batteries also need to have sufficient load cycles. So if it forces them to use only long life batteries that reduces the need for battery repkacements and is already something.
Also software… I would love to have regulations that make it clear that the root of trust on all devices need to start by the owner of the device, not by the vendor… That would allow the end users to repair the software on their devices… Replacing it with whatever else they want. Next would be to provide hardware documentation to the owners to program their own devices… I don’t expect that to happen, but I can dream.
Well it’s a start.
I like this for a lot of obvious reasons.
I worry about corporate malicious compliance though where the cost of a replacement part costs as much as the unit or near it to make up for lost revenue from selling whole units.
They could even get to the printer ink model where they sell the initial device for cheap or at a lost with planned obsolescence of parts that almost guarantee a replacement rate.
Water kettle stopped working, has fucking temper proof triangle head screws so can’t even open it without having to buy a special screwdriver bit. name and shame : kitchenaid
That’s the thing about repairing things at home or anywhere else. You need tools to do so and more than just a screwdriver and a pair of pliers. You often special tools. You can get a set of triangle bits for maybe 4 to 5 euros and you will have them for life. So don’t be a cheap. Either fix that kettle yourself, pay someone with the skills and tools to fix it, or buy a new one. But don’t whinge about not having tools.
And let’s also be honest. Some things need to be tamper proof. Most of you ain’t smart enough and experienced enough to play with things that can injure/kill you or others, no matter how many youtube videos you watch.
A eater kettle does not have that much stuff inside that it should be tamlre proof for fuck’s sake. It can use normal screws like phillips, hex or torx.
But unless you understand the electrical components and the rules and codes in their use for consumer safety, maybe, just maybe, it should be a little bit difficult to gain access to if your 10 years old.
Go buy some bloody tools and quit your whinging.
Yeah sure I’m gonna buy stupid triangle screwdrivers so my nonexistent 10yo cannot open the heater.
If the said 10yo knows where the tools are it does not matter what kind of screws there are. It just makes me have to buy stupid tools I will only ever use for one appliance.
For things like these I love Europe. For things like Chat Control I hate Europe
Started as a good idea to regulate industry for the benefit of consumers. Ends up with so many paid-for loopholes it’s mostly useless.
The cynic in me thinks the only reason the law was created from the start was to extort money from big companies.
This law still has a lot of good things in it. Calling it useless is what those companies would want you to do.
Why have a list?
Just make everything repairable.Because not everything can be repairable. Design and manufacture often require choices to be made. And you seldom get all of the things you want.
Because they were paid a lot of money to exclude certain products.
I’m noticing cars are not part of the list, despite being smartphones on wheels
Presumably the germans must have lobbied tooth and nails against this.
Also, more and more products will let you know until when they guarantee production of spare parts (it’s also driven by regulation of course).
regulation works.
Thank you E.U. I hope you have a run of people buying and shipping products all over the world and it pressures everyone else to follow suit.
Wont do.
Why?
Exhibit A: Nintendo (Switch)
Exhibit B: LogitechI mean buying from the EU to ship to themselves. It’s late here. I’m tired.
Why is bicycle on the list? A bicycle is the epitome of repairability.
Edit: it got enshittified?
Derailleur hangers come to mind, some brands use a different version in the same model lineup and model year. It’s on purpose to confuse an make it difficult for the average rider to DIY.
Also Cannondale, famous for using non-standard parts (and tools) for no apparent reason.
Ok, famous to not buy them then, thanks.
I take it you never heard Van Moof bricked bikes afteir their bankcruptcy?
Edit: and thinking about ebike motors and their parts - bosch has locked down their engines real hard
Some exceptions excluded.
It’s red because there’s nothing forcing bike manufacturers to continue down the path of repairability and outside of the enthusiast community, people might not care much, they’ll just buy what’s cheaper.
Did you ever repair a bike? Its like every model has its own special tools that you need to get Something unscrewed or pulled of. (You can buy them, though)
Although I do understand the need for some of those special tools. The thing for taking apart the chain comes to mind
Phones still have replaceable batteries? I have a Google Pixel 8. How do I even open that thing let alone replace the battery?
That enforcement only came into effect recently.
You can also buy kits to lift the back of glass sandwich phones, but that isn’t the most straightforward process.
Yes espresso, especially the well known ones(gaggia, rocket, rancilio). They can be repaired!
Well thing is this is not about whether the items are currently repairable, but whether laws require them to be.
At the moment there’s nothing stopping some dipshit from coming up with parts locks on espresso machines the way John Deere does them.
Heh, the dryer stopped working at home and my spouse was bracing to buy a new one. So nice to break out the multimeter, find the issue, and 10 dollar part later, good as new.
Think of all the waste avoided by repairing a tiny part in a gigantic appliance.
Today I repaired my toothbrush after my room mate suggested buying another one that is cheaper than mine amd the same brand as theirs.
Looked up the model, iFixIt manual available, opened it, tightened the screw on the vibrating head for the motor and put it back together.
Working flawlessly again and 50-75€ (or even more) saved.Yeah this could be great. Part of my job involves clearing up fly tip, dumped rubbish, and a shit load of it is electric appliances. Most people don’t know how to use a multimeter, but you only need to know someone who does.
I have a super common type (in EU) of Philips water kettle. It’s a reliable machine. Unfortunately the little filter “screen” for the pouring sprout is starting to break now, after many many years of use. I can’t find a replacement. It’s a super easy to manufacture part, must be a very common “breaking thing” on this widespread device… Nope.
Philips HD4646 if anyone knows a source 🙈
https://rounded.com/daily-collection-hd4646/
Might not be the cheapest, but there are compatible listed models you can try search for as well.
Nice! I didn’t find anything. I consider buying it even overpriced, it’s mainly about avoiding buying another one just because if this
Maybe there’s a fab shop by you that could print the part? Or a local enthusiasts group or something? Never used one so no idea of price but small part, prob not too expensive. I guess finding the part spec would be the challenge. Maybe they can scan the broken one or something. I actually have no clue about 3d printing so this may not be a helpful suggestion 🤷
As far as I know, home quality 3d printing is never food safe?
It can be, but is a hassle. There are food safe filaments, there are filaments that “should be” safe, like unmodified PETG, but the issue is to make all parts that are in contact with the filament food safe; extruder gears, Bowden tubes and other guides, hot ends, etc…
I imagine that it would be a hassle for parts suppliers to certify the bajillion variations of these parts as food safe.
The filaments themselves may be food safe but that doesn’t matter. The resulting object is not food safe not because of the material but because of the manufacturing process. Printing layer by layer leaves miniscule voids and holes in-between layers where bacteria can thrive and which are impossible to clean.
Your print is safe to eat out of the first time, but is never food safe again as it can never be cleaned from bacteria in all the thin holes.
That “should be” is a risk…
I (probably but very likely) have enough micro plastics in my body. Don’t need to supply it with a nuclear blast of it.
Rather buy a close enough replacement from a reputable brand or buy a better kettle for the next time (sadly).The microplastic is the least important point when it comes to food safe products. Sure microplastic is bad, and we have no real idea about the long term effects, but there are there are things that already have effects on your health in the short term:
A lot of different plastic types release actual toxins over time, especially when exposed to high heat, since that destroys the molecular bonds. Having food or water touch these toxins is a great way to absord them into your body.
Apart from that most 3D printed materials have micro ridges and air pockets that are the perfect place for bacteria to grow. That’s probably the worst thing to have in your kitchen.
Ah, sorry that didn’t even occur to me, thanks for the info.
WHY CAN’T WE GET THIS IN AMERICA I FUCKING HATE OUR POLITICIANS
We have right to repair, you have freedom of pedophilia when you’re a billionaire.
Maybe it’s time for a revolution?
I’ll see your “hate our politicians” and raise you a “hate politicians”. Your turn now.
You should hate the billionaires who own your politicians instead or as well, as they’re the root of the problem.
Then make them fear you again.
The invisible hand of the market will deal with it. Why do you hate america?
