• grue@lemmy.world
    link
    fedilink
    arrow-up
    11
    ·
    2 days ago

    Washing machines have an inner (spinning) and an outer (watertight) drum. I plan to use both for my firepit, which should allow it to be smokeless and also mitigate the “it gonna get HOT” problem.

    (I haven’t actually made it yet because my outer drum has some butyl tape or something I need to remove first. Anybody know the best way to do that?)

    • toofpic@lemmy.world
      link
      fedilink
      arrow-up
      13
      ·
      2 days ago

      Fire! Remove the tape with fire!
      ugh, sorry, I forgot it’s the dull mens club, then I don’t know.

      • grue@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        2 days ago

        I’ve considered it, but (a) it’s the outer drum that (I’m hoping) won’t get very hot, and (b) I’m worried that burning it off would leave a residue.

        • Rhaedas@fedia.io
          link
          fedilink
          arrow-up
          6
          ·
          2 days ago

          There’s nothing much insulating the outer from the inner, so it’ll get as hot as the fire, just with a small delay. Putting in some type of insulation would reduce that, but that complicates things and I have no idea what would work that wouldn’t eventually become a fire hazard. Asbestos? lol (don’t do that)

          • grue@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            2 days ago

            In theory, the design of a smokeless fire pit creates a convection current where cool air keeps getting drawn into the cavity from outside the fire pit. I’m sure the outer drum surface won’t be cool, but it shouldn’t be as hot as the inner drum either.