Mine are mostly IT stuff

• ansible playbook for updating my VMs
• nightly scheduled pipelines for CI/CD to deploy pihole and nginx-proxy-manager
• UniFi devices auto-updating to newest software and firmware
• night light / blue light filter automatically switches on and off on my PC
• all VMs automatically back themselves up to a backupserver
• backupserver syncs itself with offsite-backupserver

They have had their fair share of (sometimes easily avoidable) fuck-ups.

Stuff like:

• letting their websites SSL certificate expire (multiple times)
• telling users to set the date in their OS back to when the cert was still valid as a workaround
• accidentally DDoS’ing the AUR (I think multiple times too?)
• IIRC also some internal struggle about how to use the money donated to them

Especially the SSL cert hurts. They cannot auto-renew their websites SSL cert (and didn’t seem to learn from their first mistake) and they want to maintain a linux distro?

FYI - you only need -c copy and do not need to specify acodec and vcodec, if both of them are going to be copy anyway.

For simple cutting & slicing I honestly just write ffmpeg oneliners.

+1 fo ffmpeg and not having to install another tool for a single task.

I do not edit videos, I just record with obs-studio and cut out unneeded parts. ffmpeg does that, it does so fast and without any problems + it also works for converting videos to another codec.

I have been using Arch Linux on my Desktop PC at home since somewhere in the last quarter of 2020. I didn’t have to rescue-boot or anything like that in all those years. I did reinstall Arch once because I got a new PC.

I do have an all AMD setup, as I heard NVIDIA isn’t all too nice to linux in general and the drivers were a hassle to get right, never tried it though.

Maybe it depends on what you’re doing on your PC. I’m mostly gaming, surfing the web, youtube and a little docker on the side.

I do understand where you’re coming from, but judging from my personal experience with a friend who became a religious extremist (among other things), I don’t know if this is actually possible with some people.

This is an honest plea for helping me understand and find a solution.

I tried to talk about his religious views and the world and people for 1.5 years. Nothing helps. Words seemingly never reach this guy, except they reinforce his faith. He would also never go to therapy, as “therapists don’t want to help you, they just want your money”.

He rather declared that he (and every human on earth) has been born without empathy and is unable to reach any acceptable moral values on his own and that raping and killing children is just part of his “good god, who’s love first and foremost” than accepting that literally anything he heard about his faith isn’t as good and pure as he sees it.

He’s not my friend anymore, but

• that does not make him any less of a religious extremist
• that does not make him any less of a dangerous person for the people around him
• he already has his new social circle, who’re all of the same opinion
• you can’t force him to therapy or confinement until he hurts / kills somebody

The things outlined above are only a small part of what he told me about his faith. I feel like this one is lost for good.

To me it seems like there’s nothing anybody can do, we just need to wait until real bad shit hits the fan.

I’d really love to get all my people to use FOSS software or, at the very least, stop using WhatsApp and Co and switch to Signal.

The thing is, most people (including my people) just don’t care. At all.

The response is always one of these:

• I don’t care, let them read all I send / see all I do
• You’re just paranoid because you’re working in IT
• You can just ignore the ads
• You just gotta deal with it

It got to a point where it became so frustrating and the “paranoid” bit just pissing me off so much, I gave up. I don’t even talk about IT anymore with them, they wouldn’t (want to) understand anyway.

I feel like I’m on the only inhabitant of an island in the middle of the ocean.

I honestly think the only way to get people to care is, if the consequences themselves kick these people between the legs. Which will probably not happen in a way where they would understand “this wouldn’t have happened with FOSS software”.

I gotta ask some questions:

• does everything work the way it would on SteamOS?
• what about drivers?
• did you test gaming performance?

No problem, english isn’t my native language either.

In the end, it just boils down to: are you okay with a downtime while reinstalling the hypervisor and restoring from backups? If yes, you don’t need a RAID. If no, a RAID of some kind would probably be the most sensible choice.

You should not be able to restore the whole drive, like you would restore a VM. This is because you would first need to have Proxmox VE already running to restore the drive which runs Proxmox VE.

If your NVME drive dies, you would have to do what I outlined above:

• get new NVME drive, install in server
• install Proxmox VE manually
• install Proxmox BS manually (either lxc container or VM)
• give Proxmox BS access to backups on external HDD
• restore whatever you backed up

Though, to reiterate, I do not know anything about lxc containers.

I did go through the Proxmox VE backup settings on my server, but I could not find a way to backup lxc containers, only VMs. So maybe Proxmox VE does not support backing up lxc containers? Or maybe it just does not show any lxc container backup option because I do not run any lxc containers?

I did find this github about Proxmox VE and LXC containers, but I didn’t test it and it only has 1 star, so I’d be wary.

As a tipp: Even if your motherboard only supports 1 NVME drive, you might still be able to use multiple. You could buy a PCIe card with M.2 NVME slots, if you have any unused PCIe slots on your mainboard. With this, you should still be able to have a RAID setup.

How does it work if my ssd dies, where proxmox boot

If you only have 1 disk on your server (no RAID), you will have to

• buy a disk
• install in server
• reinstall Proxmox VE
• Install Proxmox BS
• have a regular backup on some other disk (e.g. USB HDD) to restore other VMs from

and the lvm for the containers is located on?

Are you talking about containers (lxc, docker) or the VM disks? You need a backup for VM disks anyway (Proxmox BS).

If you’re talking about containers, I do not know how to backup those. I do use docker containers but they’re all inside VMs. I like to seperate things via VMs, as a rogue container taking down it’s VM (or having other negative effects on its host) is less of a headache than a rogue container taking down the whole hypervisor because it’s running directly on the that.

For comparison, this is my disk setup for my server (my old PC):

# lsblk
nvme0n1     259:0    0 465.8G  0 disk
nvme1n1     259:1    0 465.8G  0 disk
sda           8:0    0   3.6T  0 disk
sdb           8:16   0   3.6T  0 disk
sdc           8:32   0   3.6T  0 disk

# zpool list
NAME        SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   FRAG    CAP  DEDUP    HEALTH  ALTROOT
data_raid  10.9T  2.40T  8.51T        -         -    26%    21%  1.00x    ONLINE  -
rpool       460G  7.31G   453G        -         -     8%     1%  1.00x    ONLINE  -

The 2 NVME-disks are used in a ZFS mirror (rpool in zpool list above) and store the Proxmox OS. The 3 SATA SSDs (see sd* in lsblk above) are housing all VM data in a ZFS RAID-Z1 called data_raid. With this hardware- and RAID-setup, one disk of each zpool could die right now and all I’d have to do is pay the currently horrendous hardware-prices and replace it. No data-loss or downtime until at least 2 disks of a single zpool die together.

All hardware dies at some point. Preperation is key.

Interesting. I do not know a lot about Home Assistant devices, but I thought they would just be communicating via standard WIFI + data encryption. I definitely didn’t suspect there to be a whole new standard of wireless communication to that.

I understand the thing about downtime, running pihole myself. My setup is rather simple and centralized on purpose and I don’t really mind the few minutes of “filtered DNS” downtime while pihole and pve are rebooting. As my UniFi Dream Router 7 is the firewall / gateway / DHCP server anyway, I just use pihole as primary DNS and 1.1.1.1 as secondary DNS. It’s not filtering “bad domains” via DNS, sure, but I got adblock origin and other browser extensions dealing with whatever comes along anyway.

But, yeah, for redundancy and always-online-production-setups it’s actually great having a secondary pve as a temporary stop-gap. Plus, it’s a nice and kinda fancy setup, of course. Always appreciated in selfhosted :)

I use 1 host running Proxmox VE (PVE) with a VM for Proxmox BS (PBS). Datastores are located on a USB HDD with passthrough of that specific USB ID to the PBS VM.

It works really well and the only actual downside is that, for a complete-restore (e.g. reinstall PVE or new server or hard drives) you need to set up the PBS VM again before you can use your backups.

For the host-config on PVE, I use a systemd service and timer starting a simple proxmox-backup-client backup of /etc. That is enough to restore the configuration in case of some emergency.

Also: Is there a benefit for splitting your services on 2 hosts? Shouldn’t 1 host with all VMs consume less electricity than the same VMs split on multiple hosts?

I cannot speak to collaborative editing of documents, but I do run my own docker-based nextcloud server for my own data.

I use nextcloud for:

• files
• photos (via memories app)
• contacts
• calendar
• tasks
• notes

I am not using the AIO docker image, I am using the nextcloud:APP_VERSION image, with APP_VERSION being 33 currently, preparing to upgrade to 34. My SSL-certificate is done via nginx-proxy-manager, as it was easy to setup on a different VM and it acts as a gateway to my internal services.

Syncing files, contacts and calendar works very well with my Graphene OS Pixel 9a (via the F-Droid App DAVx5, as well as my EndeavourOS desktop. The only thing I can really complain about is the documentation for selfhosting, as it seems to be missing some info. Or maybe I just didn’t find it.

If you’re interested, I can share my setup consisting of

• docker-compose.yml for local tests
• docker-compose.production.yml for production and staging deploy
• Dockerfile for nextcloud + cron container (though I may replace this with ofelia)
• Starter-Script for local tests
• GitLab CI pipeline for production and staging deploy

It may be a bit over-engineered though.